Mitel MiVoice Office 250 PBX Configuration

Overview

Configuration is required both on the system and the PBX to connect a Mitel MiVoice Office 250 phone system.

See the Mitel MiVoice Office 250 PBX Supported Versions section for details on the support for the Mitel MiVoice Office 250.

If multiple Mitel MiVoice Office 250 phone systems are to be connected then they must be connected through a Mitel CT Gateway, not entered individually. Multiple Mitel MiVoice Office 250 connections are not supported.

Configuration

Type: Select Mitel MiVoice Office 250

Name: Enter a friendly name for this PBX connection.

Host: This is the IP address or hostname of the telephone system or the associated PBX.

Port: This is the TCP port used to connect to the telephone system with, the default is 4000.

Password: The System OAI password configured on the PBX, if set. The default is no password set.

PBX Configuration

The connection to the Mitel MiVoice Office 250 uses the System OAI Level 2 socket on the PBX. This needs to be licensed on the PBX as System OAI Third Party Call Control as shown.

To enable the System OAI Level 2 events:

Open the Mitel DB Programming and open the System -> Sockets section.
Set the Enable property for System OAI Level 2 to be Yes.

To enable the system to connect to the PBX the required connection port on the PBX also needs to be enabled:

Open the Mitel DB Programming and open the System -> IP Settings section.
Set the Listening Port (Unsecured) to 4000.
Set the Listening Port (Unsecured) Enabled to Yes.