The Board Setting screen displays the voice interface cards that are currently installed in the Call Recorder. Select the new card and then double click on the entry to modify the card settings.

Board Settings

Set the following options as shown:

• Set the Interfaces drop down to T1 for US (T1) lines.
• Set the Default Voice Format to A-Law for UK and U-Law for US.
• Check Compress Dsp Codec to GSM.
• Check Always Detect Barge In.
• Check the Always Enable RX Dtmf.

Select the PCM Options from the navigation bar on the left. For each PCM entry shown ensure that the signaling option is set to ISDN Spy for ISDN and DASS2 Spy for DASS2 lines.

PCM Options

Click Apply to save the changes and then Save to close the configuration tool.

Select the Board Voice Options from the navigation bar on the left. Set the Recording and Playing format values to 7.

Board Voice Options

Click Ok to save the changes.

Select the Spy Options from the navigation bar on the left. For each entry in the Spy Caption section change the EndNumForCircuit value to 22.

Spy Options

End Num For Circuit

Click Apply to save the changes and then Save to close the configuration tool.