This system can collect SIP/RTP traffic from one mirror port. This section provides a list of all network adapters configured on the server. The port mirroring network adapters that are configured on the server need selecting here.

The system needs to be able to receive all the SIP/RTP traffic that is sent and received from each device that is to be recorded. The easiest way to do this is to have the PBX's network connection mirrored and any point to point audio disabled. This will then ensure that all the SIP/RTP traffic flows through this connection.

As the network topology of each site can be different this may not be possible. Multiple ports in different locations so that complete coverage of all the SIP/RTP traffic can be provided will need to be combined with a network switch into a single mirror port for the system.

Configuration

To configure a mirror port:

1. Access the Servers Settings -> SERVERNAME -> Recording -> Recording Sources -> SIP/IP RTP -> Mirror Ports configuration section.
2. From the list of adapters displayed check the one that needs to be used. The Name, IP Address, MAC Address and Interface name are provided for each adapter to help identify the correct one to use.
3. Click Save.
4. Restart the system.